Cylinderanslutningslangsats, slang 6x10mm, rör 10mm
Cylinderanslutningslangsats, slang 6x10mm, rör 10mm
Flexible connection kit for joining 10 mm outside-diameter copper steering lines to a moving cylinder. The hose sections accommodate cylinder movement while the main pipe runs remain fixed.
- For copper tube: 8 mm ID × 10 mm OD.
- Hose size: 6 mm ID × 10 mm OD.
- Includes 1 m of HHOSE60 hose.
- Two straight compression fittings and four HS145 support sleeves included.
- Copper pipe and steering cylinder supplied separately.
Connecting copper pipework to the cylinder
Use MTC610 with COPPER10 or matching 10 mm outside-diameter copper steering tube where the system is specified for a 6 mm hose bore. The flexible sections join the fixed lines to the cylinder connections.
VETUS specifies flexible cylinder connections of at least 500 mm each in the MTC30–MTC175 installation manual. The supplied 1 m hose provides two 500 mm sections. Check that this leaves enough freedom for the actual cylinder movement and hose route.
Fitting the hose sections
Fit a support sleeve inside each of the four hose ends. Join the fixed copper lines through the supplied straight compression fittings, and connect the other ends to the cylinder’s matching 10 mm connections.
Keep bends smooth and avoid twisting or pulling on the hose as the cylinder moves. Follow the steering manual for assembly, filling and bleeding.
What is supplied
- 1 m of HHOSE60 hose, 6 mm ID × 10 mm OD.
- Two straight compression fittings.
- Four HS145 support sleeves.
Allmänna produktattribut
| Suitable for | 8 x 10 copper tubing |
| Spare parts for product | HS1022, HHOSE6050, HS145S |
Leverans
När varan kan skickas beror på dess tillgänglighet. Leveranstiden påverkas också av din leveransadress och det fraktsätt du väljer. I vår fraktinformation kan du läsa om leveransalternativ, beräknade tider för avsändning och transport samt fraktkostnader.
Behöver du en vara till ett visst datum? Kontakta oss innan du beställer.
Returer och reklamationer
Vill du returnera en vara eller reklamera en defekt, skadad eller fellevererad produkt? Börja med att skapa ett ärende i vårt retur- och reklamationssystem online. Vi hjälper dig med nästa steg.
Connecting copper pipework to the cylinder
Use MTC610 with COPPER10 or matching 10 mm outside-diameter copper steering tube where the system is specified for a 6 mm hose bore. The flexible sections join the fixed lines to the cylinder connections.
VETUS specifies flexible cylinder connections of at least 500 mm each in the MTC30–MTC175 installation manual. The supplied 1 m hose provides two 500 mm sections. Check that this leaves enough freedom for the actual cylinder movement and hose route.
Fitting the hose sections
Fit a support sleeve inside each of the four hose ends. Join the fixed copper lines through the supplied straight compression fittings, and connect the other ends to the cylinder’s matching 10 mm connections.
Keep bends smooth and avoid twisting or pulling on the hose as the cylinder moves. Follow the steering manual for assembly, filling and bleeding.
What is supplied
- 1 m of HHOSE60 hose, 6 mm ID × 10 mm OD.
- Two straight compression fittings.
- Four HS145 support sleeves.
Allmänna produktattribut
| Suitable for | 8 x 10 copper tubing |
| Spare parts for product | HS1022, HHOSE6050, HS145S |
Leverans
När varan kan skickas beror på dess tillgänglighet. Leveranstiden påverkas också av din leveransadress och det fraktsätt du väljer. I vår fraktinformation kan du läsa om leveransalternativ, beräknade tider för avsändning och transport samt fraktkostnader.
Behöver du en vara till ett visst datum? Kontakta oss innan du beställer.
Returer och reklamationer
Vill du returnera en vara eller reklamera en defekt, skadad eller fellevererad produkt? Börja med att skapa ett ärende i vårt retur- och reklamationssystem online. Vi hjälper dig med nästa steg.
Tack för din tid och dina synpunkter.
Ditt bidrag hjälper oss att göra informationen på VetusOnline tydligare och mer korrekt och webbutiken enklare att använda.
Referensnummer: