8″ × 12″ Right-Hand VETUS P3B8X12R Propeller – Made to Order
8″ × 12″ Right-Hand VETUS P3B8X12R Propeller – Made to Order
The VETUS P3B8X12R is a three-blade P3B propeller with an 8″ diameter, 12″ pitch and right-hand rotation. This version is made to order with the shaft connection machined to the agreed dimensions.
- Diameter × pitch: 8″ × 12″.
- Right-Hand rotation.
- Three blades; manganese bronze.
- Blade area ratio Fa/F: 0.52.
- Shaft bore, taper and keyway machined to the agreed specification.
Not sure which propeller you need?
Order a technical propeller calculation based on your boat, engine, gearbox and stern gear data.
Match the propeller to the boat
Select diameter and pitch to suit the engine, gearbox and hull. Propeller rotation must match the gearbox output for ahead operation.
Made to order
The shaft bore, taper and keyway are agreed before machining. Provide a dimensioned shaft drawing so the complete connection can be checked.
Ordering conditions
Because this product is specially manufactured to specification, it cannot be returned under the normal right of withdrawal. This does not affect your rights if the product is defective or supplied incorrectly.
Allmänna produktattribut
| Number of blades | 3 |
| Sense of rotation | Right-handed |
| Disk area ratio (Fa/F) | 0.52 |
Leverans
När varan kan skickas beror på dess tillgänglighet. Leveranstiden påverkas också av din leveransadress och det fraktsätt du väljer. I vår fraktinformation kan du läsa om leveransalternativ, beräknade tider för avsändning och transport samt fraktkostnader.
Behöver du en vara till ett visst datum? Kontakta oss innan du beställer.
Returer och reklamationer
Vill du returnera en vara eller reklamera en defekt, skadad eller fellevererad produkt? Börja med att skapa ett ärende i vårt retur- och reklamationssystem online. Vi hjälper dig med nästa steg.
Match the propeller to the boat
Select diameter and pitch to suit the engine, gearbox and hull. Propeller rotation must match the gearbox output for ahead operation.
Made to order
The shaft bore, taper and keyway are agreed before machining. Provide a dimensioned shaft drawing so the complete connection can be checked.
Ordering conditions
Because this product is specially manufactured to specification, it cannot be returned under the normal right of withdrawal. This does not affect your rights if the product is defective or supplied incorrectly.
Allmänna produktattribut
| Number of blades | 3 |
| Sense of rotation | Right-handed |
| Disk area ratio (Fa/F) | 0.52 |
Leverans
När varan kan skickas beror på dess tillgänglighet. Leveranstiden påverkas också av din leveransadress och det fraktsätt du väljer. I vår fraktinformation kan du läsa om leveransalternativ, beräknade tider för avsändning och transport samt fraktkostnader.
Behöver du en vara till ett visst datum? Kontakta oss innan du beställer.
Returer och reklamationer
Vill du returnera en vara eller reklamera en defekt, skadad eller fellevererad produkt? Börja med att skapa ett ärende i vårt retur- och reklamationssystem online. Vi hjälper dig med nästa steg.
Tack för din tid och dina synpunkter.
Ditt bidrag hjälper oss att göra informationen på VetusOnline tydligare och mer korrekt och webbutiken enklare att använda.
Referensnummer: